https://ir.lib.vntu.edu.ua//handle/123456789/9442 2026-04-14T13:03:24Z 2026-04-14T13:03:24Z Prokoptsuk, Sergeij Pavlovic Прокопчук, Сергій Павлович https://ir.lib.vntu.edu.ua//handle/123456789/26039 2019-07-08T07:40:55Z 1995-12-21T00:00:00Z

Verfahren zur Herstellung von modifizierten Polymeren Prokoptsuk, Sergeij Pavlovic; Прокопчук, Сергій Павлович Verfahren zur Herstellung von modifizierten Polymeren durch Einwirken eines sauerstoffhaltigen Gases auf das zu modifizierende Polymere, wobei zunächst das sauerstoffhaltige Gas während der Polymerisation in den Polymerisationsreaktor eingeführt wird und daran anschließend das sich bildende Polymerisat auf eine Temperatur von 100 bis 180°C erhitzt wird. Als sauerstoffhaltiges Gas wird dabei vorzugsweise Luft verwendet. Das Verfahren eignet sich insbesondere für thermoplastische Polymere.; A process for the production of modified polymer by the action of oxygen containing gases. The gases are introduced into the polymerisation reactor during polymerisation, followed by heating the polymers product at 100-180 deg C.

1995-12-21T00:00:00Z Stakhov, Alexei P. Kozak, Andrei A. Solyanichenko, Nikolai A. Kuzmin, Ivan V. Azarov, Alexei D. Стахов, Олексій Петрович Козак, Андрій Андрійович Соляніченко, Микола Олександрович Кузьмін, Іван Васильович Азаров, Олексій Дмитрович Стахов, Алексей Петрович Козак, Андрей Андреевич Соляниченко, Николай Александрович Кузьмин, Иван Васильевич Азаров, Алексей Дмитриевич https://ir.lib.vntu.edu.ua//handle/123456789/9470 2016-04-15T00:00:15Z 1980-11-27T00:00:00Z

Einrichtung zur Reduktion von n-stelligen Codes mit Irrationsbasis auf die Minimalform Stakhov, Alexei P.; Kozak, Andrei A.; Solyanichenko, Nikolai A.; Kuzmin, Ivan V.; Azarov, Alexei D.; Стахов, Олексій Петрович; Козак, Андрій Андрійович; Соляніченко, Микола Олександрович; Кузьмін, Іван Васильович; Азаров, Олексій Дмитрович; Стахов, Алексей Петрович; Козак, Андрей Андреевич; Соляниченко, Николай Александрович; Кузьмин, Иван Васильевич; Азаров, Алексей Дмитриевич A digital process is provided for the reduction of codes with an irrational base to the min. form. Typically, the codes are of the Fibonacci-1-code type or 'p' proportion type. The units have at least one input, one output, a set input, two convolution inputs, a convolution control input and a convolution control output. For a five stage unit, all stages are identified, with an information input, an information output to read the stage condition. Two conformal inputs are provided, together with a set input. Each stage is formed by a flip-flop and AND gate.

1980-11-27T00:00:00Z Stakhov, Alexei P. Azarov, Alexei D. Luzhetsky, Vladimir A. Стахов, Олексій Петрович Азаров, Олексій Дмитрович Лужецький, Володимир Андрійович Стахов, Алексей Петрович Азаров, Алексей Дмитриевич Лужецкий, Владимир Андреевич https://ir.lib.vntu.edu.ua//handle/123456789/9467 2019-07-08T07:52:10Z 1982-01-07T00:00:00Z

Analog-Digital-Umsetzer Stakhov, Alexei P.; Azarov, Alexei D.; Luzhetsky, Vladimir A.; Стахов, Олексій Петрович; Азаров, Олексій Дмитрович; Лужецький, Володимир Андрійович; Стахов, Алексей Петрович; Азаров, Алексей Дмитриевич; Лужецкий, Владимир Андреевич An analog / digital converter includes amplifiers, an analog switch connected by its inputs to the amplifiers and a unit of comparison has multiple floors receiving its entry the output signal from the switch. The converter further includes a translation device has seriel code translates the code in parallel from the unit in a submitted pulse sequence at the entrance of a digital switch. The converter is provided with a reversible counter and a counter the inputs of the two counters being connected to the switch; The output signal from the counters is sent to a unit code has reminders-evacuations and a code analysis unit is connected via a register has a unit determination of the scan mode, the output signal from the unit being transmitted to the unit and an analog / digital converter connected by its output at the entrance the first amplifier. A control unit predetermine a working algorithm for this converter, so that the direct conversion mode, the conversion method of the analog input value in a pan-bit code occurs after K cycles, while in the metrological control mode, binary numbers are determined, the metrological characteristics of deviation exceed acceptable values.

1982-01-07T00:00:00Z