Дослідження робочих режимів гідроімпульсного привода та його технологічних можливостей
Завантаження...
Файли
Дата
Науковий керівник
Редактор
Інші учасники
Відповідальний
ORCID
Назва журналу
Номер ISSN
Назва тому
DOI
Альтернативна назва
Анотація
Опис
Ключові слова
УДК
Тип документа
Мова
ISSN
Посилання на публікацію
Серія, номер
ISBN
ББК
Інші ідентифікатори
Пов’язані матеріали
Спонсорська підтримка
Правовласник
Бібліографічний опис
Богатюк М. О., Веселовська Н. Р. Дослідження робочих режимів гідроімпульсного привода та його технологічних можливостей // Матеріали ІІІ Міжнародної науково-технічної конференції «Перспективи розвитку машинобудування та транспорту-2023», 01-03 червня 2023 р. Електрон. текст. дані. 2023. URI: https://conferences.vntu.edu.ua/index.php/prmt/pmrt2023/paper/view/18107.
Схвалення
Рецензія
Доповнено
Цитується в
Список використаної літератури (3)
- R.D.-Lototskyi, R.R. Obertyukh, M.R. Arkhipchuk, O.V. Polishchuk. Utility model patent No. 46373 Ukraine, MPK7 B30 B9/18. Ball two-stage pressure pulse generator. Applicant and patent owner Vinnytsia. national technical university. No. U200902968; statement 30.03.2009; published 25.12.2009, Bull. No. 3.1. R.D.-Lototskyi, R.R. Obertyukh, M.R. Arkhipchuk, O.V. Polishchuk. Utility model patent No. 46373 Ukraine, MPK7 B30 B9/18. Ball two-stage pressure pulse generator. Applicant and patent owner Vinnytsia. national technical university. No. U200902968; statement 30.03.2009; published 25.12.2009, Bull. No. 3.
- I. V. Kots, O. V. Berezyuk. Vibrating hydraulic drive for pressing industrial waste. Bulletin of the Vinnytsia Polytechnic Institute. 2006. No. 5. P. 146–149.
- Shatokhin V., Ivanchuk Y., Dvirna O., Veselovskaya N., Jurczak W. Dynamic Processes Modeling in a Peristaltic Pump with a Hydraulic Drive for the Bingham Fluid. Advances in Science and Technology Research Journal. 2022. № 16 (4), Р. 256–269. Iskovych- Lototsky R., Veselovska N., Shargorodsky S., Rutkevych V., Omiotek Z., Mamyrbaev O. and Zhunissova U. RESEARCH OF WORKING MODES HYDRO-IMPULSE DRIVE AND ITS TECHNOLOGICAL CAPABILITIES Abstract. The problems of modern mechanical engineering are primarily related to the reduction of material and energy consumption. These problems are solved thanks to the introduction of modern technologies of mechanical processing of metals by pressure. Such technologies include the processes of rolling, or local localized deformation, which ensure low-waste or zero-waste production of parts blanks with minimal energy costs. This is especially true for mass-produced products, in particular, ball bearings, where the manufacturing processes of outer and inner rings, for the most part, determine their cost.