Наукові видання каф. ЗФ
Recent Submissions
-
Вплив термоциклічної обробки на субструктурне зміцнення композиційних матеріалів з алюмінієвою матрицею
(Хмельницький національний університет, 2017)The possibilities are revealed to ensure the high–strength state of composite materials based on aluminium and its alloys armoured with boron fibres by forming substructure in a matrix and its stabilizing with impurity ... -
Impact of thermocycling on aluminum alloy polygonal structure
(Ştefan cel Mare University of Suceava, 2017)Method of mechanical spectroscopy used for studies of structure formation of dispersly-hardening alloys based on aluminium after thermocycling in the field of external stresses and without stresses. It is found that the ... -
Автоматизація вимірювальної системи-установки для дослідження внутрішнього тертя
(Вінницький державний педагогічний університет імені Михайла Коцюбинського, 2018)There have been considered methods of improvement of operation speed and measurement accuracy of the inverse pendulum rotation angle for the study of internal friction. -
Розподіл енергії в спектроенергетичних перетворювачах
(Хмельницький національний університет, 2018)The problem of research of spectroscopic converters of the optical and near-range range is considered in this paper. The theoretical model of such spectrogenerators operating in conditions of self-excitation of the system ... -
Transient analysis in 1st order electrical circuits in violation of commutation laws
(Wydawnictwo Czasopism i Książek Technicznych, 2021)The paper considers the usage of non-standard analysis mathematical apparatus to solve some non-trivial problems of electrical engineering theory. The axiomatics of non-standard analysis makes it possible to simplify the ... -
Діагностика, оцінювання і контроль предметних компетентностей із курсу загальної фізики у майбутніх учителів природничих наук
(Гельветика, 2021)The article theoretically substantiates and considers diagnostics, assessment and control of subject competencies in the course of general physics in future science teachers. Attention is drawn to the fact that the use ... -
Вплив термоциклічної обробки під навантаженням на субструктурне зміцненя матриці волокнистого композиційного матеріалу АД1-В
(Вінницький державний педагогічний університет імені Михайла Коцюбинського, 2021)Experimental research of the influence of thermal cycling in the fields of external loads on the formation and stabilization of the substructure in the matrix of the composite in order to achieve a more strengthened state ... -
Вплив термоциклювання на субструктуру сплавів Al-Cu та Al-Cu-Zn
(Вінницький державний педагогічний університет імені Михайла Коцюбинського, 2021)The paper presents the results of research on the effect of thermal cycling on the mechanism of polygonization in structural materials based on aluminum. -
Синергетика і математичне моделювання: інтеграція фізичних задач у процес математичної підготовки технічних фахівців
(Вінницький державний педагогічний університет імені Михайла Коцюбинського, 2025)The work is devoted to the urgent problem of improving the quality of fundamental mathematical training of future technical specialists in the conditions of dynamic development of science and technology. This contributes ... -
Формування ключових компетентностей здобувачів у контексті сталого розвитку під час навчання фізики
(Вінницький державний педагогічний університет, 2025)The article explores the theoretical and methodological foundations of developing students’ key competencies in physics education within the framework of the Sustainable Development Goals (SDGs). Physics, as a fundamental ... -
The task approach is one of the conceptual approaches to fundamentalizing the mathematical training of students of technical specialties
(Vinnytsia Mykhailo Kotsiubynskyi State Pedagogical University, 2025)The article deals with the task-based approach as one of the leading mechanisms for implementing the fundamentalization of mathematical training of students of technical specialties. An example of realization of the task ... -
The appearance of standing wave structures in the reaction medium during the diffusion development of the chain reaction process
(Uzhhorod National University, 2026)Розуміння динамічної поведінки радикалів у реакторах, які зазнають газофазного окислення органічних речовин, має вирішальне значення для оптимізації конструкції реактора та безпеки в промисловості. -
Формування зображень з використанням адаптивного суперсемплінгу із перекриттям тайлів
(ВНТУ, 2026)The article proposes a new method of adaptive tile overlapping supersampling (AOTSS). The method is based on dividing the image into square tiles with an additional overlap zone, which eliminates artifacts at the boundaries ... -
The use of computer-integrated technologies in the process of teaching physics
(Izdevniecība «Baltija Publishing», 2023)Currently, there is a need to design an open informational and educational environment that will ensure a decent level of organization of the educational process in the mixed and distance forms of learning, make it ... -
Імітаційне моделювання інвестиційних проектів
(ВНТУ, 2025)The scientific article is devoted to the development of a simulation model of an investment project using the MathCAD system. The developed simulation model allows the investor to assess the risk factor, the probability ... -
Feasibility justification for a hybrid ultrasonic flowmeter for natural gas
(Editorial board of Annali d’Italia, 2026)The possibility of creating a hybrid ultrasonic flowmeter of natural gas is presented, which combines a fourchannel ultrasonic transit-time method (TOF) and a resonance method. A mathematical description of such a flowmeter ... -
Фазові переходи у складних оксидних структурах
(International Scientific Unity, 2025) -
Використання графену та 2D-матеріалів у наноелектроніці
(International Scientific Unity, 2025) -
Development and investigation of a four-channel ultrasonic flowmeter with equal signal paths
(Global Science Center LP, 2026)The paper proposes a new model of a four-channel ultrasonic flowmeter. The measuring device operates, unlike the classical one, with two groups of ultrasonic beams, and at the same time they have equal signal path lengths. ... -
Вплив турбулентності газового потоку на результати вимірювання ультразвуковим витратоміром
(ВНТУ, 2026)The paper investigates the influence of gas flow turbulence on algorithmic procedures for time-offlight estimation in ultrasonic flow meters. The main error sources arising during digital signal processing are analyzed, ...

