dc.contributor.author | Яглінський, В. П. | uk |
dc.contributor.author | Гутиря, С. С. | uk |
dc.contributor.author | Кул Онур | uk |
dc.date.accessioned | 2023-04-03T11:15:45Z | |
dc.date.available | 2023-04-03T11:15:45Z | |
dc.date.issued | 2021 | |
dc.identifier.citation | Яглінський В. П. Оптимізація форми поперечного перерізу стріли крана-маніпулятора [Електронний ресурс] / В.П. Яглінський, С.С. Гутиря, Кул Онур // Матеріали ІІ Міжнародної науково-технічної конференції «Перспективи розвитку машинобудування та транспорту», Вінниця, 13-15 травня 2021 р. – Електрон. текст. дані. – Вінниця, 2021. – Режим доступу: https://conferences.vntu.edu.ua/index.php/prmt/pmrt2021/paper/viewFile/13298 | uk |
dc.identifier.uri | http://ir.lib.vntu.edu.ua//handle/123456789/36631 | |
dc.description.abstract | Проаналізовано поточний ринок компоновочних схем сучасних крано-маніпуляторів з різноманітними
варіантами форм поперечного перерізу стріл, які впливають на умови міцності і стійкості. Розглянуто
переваги кожної з форм і технологічні можливості. Виявлено нові найбільш оптимальні конструкції
профілей поперечних перерізів телескопічних стріл, так названі овоїдні профілі, в яких вдало
використана арочна форма. Верхній пояс перетину секції під навантаженням стріли працює на розтяг,
а нижній пояс перетину – на стиск. При цьому бічні стінки стріли не згинаються. | uk |
dc.description.abstract | The current market of layout schemes of modern crane-manipulators with various variants of forms of cross
section of arrows influencing conditions of durability and stability is analyzed. The advantages of each of forms
and technological possibilities are considered. The new most optimal designs of cross-sectional profiles of
telescopic arrows, the so-called ovoid profiles, in which the arched shape was successfully used, have been
discovered. The upper section belt under the boom load is tensile, and the lower section belt is compressed. The
side walls of the arrow are not bent. | en |
dc.language.iso | uk_UA | uk_UA |
dc.publisher | ВНТУ | uk |
dc.relation.ispartofseries | Матеріали ІІ Міжнародної науково-технічної конференції «Перспективи розвитку машинобудування та транспорту», Вінниця, 13-15 травня 2021 р. | uk |
dc.relation.uri | https://conferences.vntu.edu.ua/index.php/prmt/pmrt2021/paper/viewFile/13298 | en |
dc.subject | секція | uk |
dc.subject | обладнання | uk |
dc.subject | профіль | uk |
dc.subject | конструкція | uk |
dc.subject | максимальні напруги | uk |
dc.subject | кручення | uk |
dc.subject | вигин | uk |
dc.subject | section | en |
dc.subject | equipment | en |
dc.subject | profile | en |
dc.subject | construction | en |
dc.subject | maximum stresses | en |
dc.subject | torsion | en |
dc.subject | bending | en |
dc.title | Оптимізація форми поперечного перерізу стріли крана-маніпулятора | uk |
dc.title.alternative | Optimization of the shape of the cross-section of the boom of the manipulator crane | en |
dc.type | Thesis | |
dc.identifier.udc | 629.1.04 | |
dc.relation.references | Малютин Л.Л. Крановые стрелы. В поисках компромисса.// Основные Средства. 2009. № 11. | ru |
dc.relation.references | Hydraulic Excavator ZAXIS450-3. Parts Catalog. – Hitachi Construction Machinary Co., Ltd, 2006. – 501 pg. | en |
dc.relation.references | Kalweit C. Mehr als ein Ersatz für den Neckar hafen / Christian Kalweit // Hebezeuge Fördermittel. – 2007. – №5. –
ss. 254–255. | en |
dc.relation.references | https://os1.ru/article/7533-kranovye-strely-v-poiskah-kompromissa | en |
dc.relation.references | Palis S. Anti-Sway System for Slewing Cranes / Stefan Palis, Frank Palis, Mario Lehnert // 22nd International
Simposium on Automation and Robotics in Construction ISARC. – Ferrara, 2005. – pp. 9–18. | en |