dc.contributor.author | Чухліб, В. Л. | uk |
dc.contributor.author | Дуванський, О. М. | uk |
dc.contributor.author | Biba, N. | en |
dc.date.accessioned | 2023-04-03T12:38:34Z | |
dc.date.available | 2023-04-03T12:38:34Z | |
dc.date.issued | 2021 | |
dc.identifier.citation | Чухліб В.Л. Моделювання кування циліндра з наскрізним отвором [Електронний ресурс] / В.Л. Чухліб, О.М. Дуванський, N. Biba // Матеріали ІІ Міжнародної науково-технічної конференції «Перспективи розвитку машинобудування та транспорту», Вінниця, 13-15 травня 2021 р. – Електрон. текст. дані. – Вінниця, 2021. – Режим доступу: https://conferences.vntu.edu.ua/index.php/prmt/pmrt2021/paper/viewFile/13304 | uk |
dc.identifier.uri | http://ir.lib.vntu.edu.ua//handle/123456789/36635 | |
dc.description.abstract | Комп’ютерне моделювання кування сьогодні є актуальною темою для досліджень, оскільки з його допомогою можна отримати результати напружено-деформованого стану, структури, а також виявити дефекти та спрогнозувати розподіл металу. В дослідженні кування циліндра з наскрізним отвором моделювання допомагає спрогнозувати виникнення дефектів, течію металу та вплив параметрів кування на форму готової деталі. В результаті дослідження було звужено коло доцільних параметрів заготовки і проведено аналіз розподілу об’єму деформованого металу. | uk |
dc.description.abstract | Computer simulation of forging is a relevant topic for research today, because it can be used to obtain the results of stress-strain state, structure, as well as to detect defects and predict the distribution of the metal. In the study of forging a cylinder with a through hole, modeling helps to predict the occurrence of defects, metal flow and the influence of forging parameters on the shape of the finished part. As a result of the study, the range of appropriate parameters of the workpiece was narrowed and the analysis of the volume distribution of the deformed metal was performed. | en |
dc.language.iso | uk_UA | uk_UA |
dc.publisher | ВНТУ | uk |
dc.relation.ispartofseries | Матеріали ІІ Міжнародної науково-технічної конференції «Перспективи розвитку машинобудування та транспорту», Вінниця, 13-15 травня 2021 р. | uk |
dc.relation.uri | https://conferences.vntu.edu.ua/index.php/prmt/pmrt2021/paper/viewFile/13304 | en |
dc.subject | моделювання | uk |
dc.subject | кування | uk |
dc.subject | циліндр | uk |
dc.subject | протягування | uk |
dc.subject | modeling | en |
dc.subject | forging | en |
dc.subject | cylinder | en |
dc.subject | broach | en |
dc.title | Моделювання кування циліндра з наскрізним отвором | uk |
dc.title.alternative | Modeling the forging of a cylinder with a through hole | en |
dc.type | Thesis | |
dc.identifier.udc | 621.7 | |
dc.relation.references | Гуревич Д.Ф., Воловик А.В. Арматура трубопроводная металлургических производств. Справочник.- М.: Металлургия, 1984. | ru |
dc.relation.references | Nikolay Biba, Alexander Maximov, Sergei Stebunov, Alexey Vlasov. The model for simulation of thermally, mechanically and physically coupled problems
of metal forming. URL: ttp://www.qform3d.co.uk/publications // Article. - Metal Forming, 2012. | en |